Information Technology Services

• Dual projectors/screens

• Installed PC
• Laptop HDMI
• Aux Audio (3.5mm jack)

• 1 USB webcam
  • Facing the audience (located at the lectern)
  • Connected to the installed PC

• • Audio playback from selected AV source through room's installed speakers. 

Get started by selecting a source 

• Tap the touch panel to access the main control page.
• Select the desired source on the top row of the touch panel.
• The projectors will turn on and display the selected source. Controls won’t function during projector warm up. 
• Once the projector is on, other sources can be selected using the appropriate buttons.  

Installed PC

• Select "Installed PC" to route the PC to the projector and rear monitors.
• Audio will automatically route to installed speakers.
• Login to the installed PC with Brandeis UNET credentials
• When finished, log out of computer. Please DO NOT shut down the computer.

Laptop/Mobile Device

• Select “Laptop HDMI” to connect your own laptop device using the installed HDMI cable at the lectern.

• There may be a set of display adapters at the podium, but they can go missing or become damaged. Users are encouraged to bring their own adapters to ensure successful connectivity.
• A USB cable is located at the podium that can be connected to the laptop if use of the classroom's installed cameras or microphones will be used for web conferencing or recording on the connected laptop. By connecting the USB cable to the laptop, the cameras and microphones will become available as sources in the webconferencing or recording application.

Aux Audio

• Select "Audio/AUX sources" button from main page to connect an audio device via the 3.5mm jack on the faceplate at the top of the AV rack.

• This feature allows users to connect an external audio device to the AV system for playback through the installed speakers in the classroom.

• Press Source Volume or Mic Volume on the right and left sides of the touch panel to independently control mic volume or source audio. 
• Raise or lower volume with the up/down arrow buttons.
• Ensure that audio levels are set properly on the source device (i.e. installed PC or laptop). If volume is up on the touch panel but audio level is not present or low, the volume may need to be adjusted on the source device (such as the installed PC or laptop/mobile device). 

• To shut down the system, press the red System Off button from the main page.
• Then press the green Power Down button to confirm.
• If using the installed PC, log out of the computer, but do not shut it down. It will go to sleep in low power mode after the user has logged in
• Please return any wireless devices to charger bays before leaving!